Deep Decontamination: Remove Iron Particles with Dub Boy Iron Shunk

Deep Decontamination: Remove Iron Particles with Dub Boy Iron Shunk

Even after a thorough wash, your car's paint and wheels may still hold onto invisible contaminants that regular shampoos just can’t remove. One of the most stubborn and damaging of these is iron fallout—tiny metallic particles that come from brake dust, rail dust, and industrial pollution. Over time, they embed themselves into your paint and rims, leading to dullness, rust spots, and a rough surface.

Enter Dub Boy Iron Shunk, your go-to solution for iron decontamination. In this blog, we’ll explain what iron fallout is, why it matters, and how Iron Shunk can restore your vehicle’s shine and smooth finish.

What Is Iron Fallout and Why Is It Harmful?

Iron fallout refers to microscopic iron particles that settle on your car’s surfaces, especially on the wheels and lower panels. These contaminants are usually invisible at first but can oxidize and cause rust-like stains and surface corrosion. Over time, they compromise your paint’s clarity and make it harder to apply waxes, sealants, or coatings.

Why Use Iron Shunk – Dub Boy's Iron Remover?

Dub Boy Iron Shunk is a high-performance iron remover formulated to react with embedded metal particles and dissolve them chemically—without damaging your paint or wheels.

  • Visual Reaction: Once sprayed, Iron Shunk begins to react with iron contaminants, turning purple as it breaks them down.

  • Safe for Paint and Wheels: pH-balanced and non-aggressive, it’s safe to use on clear coat, painted surfaces, and most wheel finishes.

  • Boosts Surface Prep: Removing iron fallout is essential before claying or applying ceramic coatings or waxes.

How to Use Dub Boy Iron Shunk

  1. Start with a Clean Surface: Wash your vehicle first with Dub Boy shampoo to remove loose dirt and grime.

  2. Spray Generously: Apply Iron Shunk to the wheels and painted surfaces, focusing on areas prone to fallout.

  3. Wait and Watch: Allow it to dwell for 3–5 minutes. You’ll notice the product turning purple as it reacts with iron particles.

  4. Agitate if Necessary: For heavy contamination, gently agitate with a soft brush or microfiber mitt.

  5. Rinse Thoroughly: Use a strong stream of water to rinse away the dissolved contaminants.

Tip: Avoid letting the product dry on the surface, and always work in a shaded area or cool panel.

When to Decontaminate with Iron Shunk?

  • Every 3 to 6 months depending on driving conditions

  • Before polishing or applying wax/coating

  • If your paint feels rough after washing

  • After winter driving or exposure to brake-heavy traffic zones

Conclusion

Iron decontamination is a critical step in advanced car care, and Dub Boy Iron Shunk makes the process easy, safe, and highly effective. By regularly removing these invisible threats, you're not only improving the appearance of your vehicle but also preserving its value and protecting the paint long-term.

Ready for your next deep clean? Add Iron Shunk to your detailing arsenal and feel the smooth difference.

Back to blog